Woody's Insider Network
 
 

Studs
Runners
Support Plates
Accessories
Templates & Patterns
Woody's Wear
Technical Support
Installation Instructions

 

 

 

 

 

Trail Support Plates

Double Grand™ Digger® Aluminum for Single Ply Tracks

The Double Grand™ Digger® support plate can only be used with the Grand Master stud in stud patterns on our 286S, 300S and 252S templates for single ply tracks. The addition of a dual configuration provides additional studding options in the middle belt.

The Double Grand] Digger is available in 12, 48 and 250 piece packages. Patterns for single ply tracks are available under Trail Templates.

TORQUE SPEC-The Grand Master stud must be torqued to 20 ft. lbs.

 
 

 

  Material Hole Size Part #
Wish List
  Natural Aluminum 5/16 ADG-3775

 
Related Products
 
This template has patterns for single ply tracks with a 3.0 pitch and should not be used on any other tracks. This template will fit 15
Single Ply Template 3.0 Pitch
Stud patterns on Woody's templates are CAD designed to maintain track balance.These stud patterns are recommended in the  stud and runner application guide. This stud template will give  you the best stud pattern for your snowmobile and the part number for this studding template this stud pattern.

This template is for single ply tracks with a 2.52 pitch and should not be use on any other tracks. This template will fit 14
Single Ply Template 2.52 Pitch
Stud patterns on Woody's templates are CAD designed to maintain track balance.These stud patterns are recommended in the  stud and runner application guide. This stud template will give  you the best stud pattern for your snowmobile and the part number for this studding template this stud pattern.

This template has patterns for single ply tracks with a 2.86 pitch and should not be used on any other tracks. This template will fit 15
Single Ply Template 2.86 Pitch

 

Related Categories
 
Trail Runners for Arctic Cat, Polaris, Ski-Doo and Yamaha Snowmobiles Trail Studs
 

Review the studding recommendations of the snowmobile and/or track manufacturer and only use genuine Woody's® products. This will provide maximum traction, longevity of the product and prevent track damage. The warranty for studs is void unless the studs are installed with Woody's® installation tools, support plates and lock nuts following the directions in the installation instructions.

Please Note: There is no warranty for COMPETITION PRODUCTS. They are not designed for trail use. Competition products are for competition only on a closed course.

 

 
> ABOUT US    > WARRANTY    > SITE MAP     > SEARCH    > WHERE TO BUY    > CONTACT US   > VIEW WISH LIST   > HOME
© 2010 International Engineering & Manufacturing, Inc. All rights reserved.  |  Website developed by Mindscape.